|
you too can have a holiday unicorn! |
Most of my d.i.y. posts are actually useful, so it was time for something…silly. Last summer I spent a smoky day trapped inside and played with making some unicorn horns. I never remembered to blog about it, but it was entertaining.
|
obviously too much time on my hands… |
|
tree headband inspiration! |
When I saw a Christmas tree headband at the craft store, inspiration struck…Major needed to be a holiday unicorn! You can theme this in any colors or patterns you like (rainbow holiday would be epic), I went with ugly holiday sweater (since I already had the materials) but you could go classy too (but this is more fun I think!)
|
all the stuff (and more!) |
Materials list:
8.5 x 11 (or larger) green felt
8.5 x 11 scrap paper
small scrap cardboard
elastic, most any width will do, approx 24" long
random ribbon, yarn, string, pompoms, tiny ornaments, whatever you can find
standard scissors, ruler, glue (hot glue is best, white/fabric glue will work)
optional: glitter, cup of tea…
This is pretty easy, but just a few fiddly steps along the way:
|
template on paper |
|
cut out onto the felt |
Gather your materials and draw a template on your paper. Keep the top size about 1", as you'll need that extra to overlap later. Now cut the shape out of the felt.
|
glue the edge, and your fingers, to make a cone |
Gluing the edge is the most fun you can have while burning yourself with a glue gun. (OK, seriously, be careful, but I took no permanent damage!) The overlap of each edge will be about 1/4 inch, no measuring needed, bring the edges together and add a bead of glue, attach, and continue the length of the cone.
|
basic cone/horn is complete! |
|
cut a circle (about 3"), from the leftover felt |
|
stuffy stuff stuff (use a pencil/skewer to get to the point) |
At this point you can trim the bottom of the cone flat, and cut a circle from leftover felt which will cover the bottom a bit later. Now you can stuff the cone! I used some leftover batting, but newspaper, paper towels, cotton balls, lots of things would work. Make sure it is stuffed pretty tight (no floppy horns wanted!).
|
add support cardboard with holes for elastic |
|
thread elastic through holes |
|
now add the final fill and glue on the bottom |
Now a fiddly bit: To keep the felt from tearing and support the elastic, glue
support cardboard to each side on the inside of the cone. Poke holes in
both sides (I used an exacto knife but a nail would be great) and
thread your elastic through. You can estimate, I cut mine about 24
inches, which is extra long but worked great. Put in a little extra fluff and glue your circle to the bottom.
|
glued and ready for decoration |
|
ribbon twisted around, tack at top and bottom with glue |
Now the fun begins. Choose a string/ribbon/yarn and glue it into the top. Then twist the ribbon around, pulling a bit, so the felt bulges a little (just like a REAL unicorn horn!). Then glue it again to the bottom, and your basic horn is done!
|
all the sparkly decorations! |
|
in process: glitter everywhere, pompom party galore! |
Now glue on all the little decorations you like. I had pompoms and random silver stars, but beads, tiny ornaments, even just more pretty ribbon or rickrack would be cute. Place and glue until you get to something you like. Then add a few more, just because. Now just pick off all the little hot glue hairs that have stuck all over, I'll wait…
|
made a fun star because…glitter! |
|
ugly holiday sweater unicorn horn complete! |
Your horn is done! Now go try it on your horse. Major just LOVED his horn…I'm sure he is already plotting ways to get back at me. Watching him walk and trot with the horn bouncing along was the best thing I'd seen in a long time. I hope your horses become holiday unicorns too!
|
unicorn bowing to me (looking for treats!) |
|
more pictures, really?! My unicorn really needs more forelock |
|
shadow unicorn |
|
unicorn is done posing and plotting my demise |